Samsung SCH-U470GBAVZW User Manual
Page 42
39
Call Name Dialing: Contact Name
To use Name Dial, you’ll need to have entries stored in your Contacts list. For more
information, refer to "Adding a Contact" on page 56.
1.
From the main screen, press and hold the Voice Commands key (
).
2.
After a brief pause, a list of optional commands appears in the display and
the audio prompt “Please say a command” plays through the
speakerphone.
3.
Say “Call” at a distance of 3-12 inches from the phone in a natural voice.
4.
“Please say the Name, Number, Voicemail or Last Number” plays through
the speakerphone.
5.
To use Name Dialing, say the name of the contact that you want to dial.
6.
The name that you said is repeated through the speakerphone and your
phone dials the number (or prompts you to select which number to dial if
more than one phone number is stored for that contact).
7.
If VoiceSignal is not sure of the name that you said, a list of possible
matches appears in the display.
8.
You’re asked to confirm the correct name as VoiceSignal displays the
results. Say “Yes” or “No” to confirm or reject the number when prompted.
9.
VoiceSignal repeats the number that you selected and dials that number.
Send Text Msg: New Message
1.
From the main screen, press and hold the Voice Commands key (
).
2.
A list of commands appears in the display and the audio prompt "Please
say a command" plays through the speakerphone.
3.
Say “Send Text” or "Send Picture" at a distance of 3-12 inches from the
microphone.
4.
“Please say the name or number” plays through the speakerphone. Say a
phone number or a contact name exactly as it is displayed in your Contacts
list.
5.
The NEW TXT MSG screen or NEW PICTURE MSG screen will appear in the
display with the To field filled in with the contact name or number that you
specified.
6.
To complete the message, refer to Step 5 in see "Creating and Sending
TXT Messages" on page 72 or see "Creating and Sending Picture
Messages" on page 73.
0
0