Samsung SCH-U740CDAVZW - Manual (Page 92)

89
Edit Lock Code
The default lock code is the last four digits of your phone number. Edit Code allows
you to change this code to a lock code of your preference.
1. In idle mode, press MENU, use the right navigation key to highlight
Settings & Tools and press .
2. Press 6 ( ) Phone Settings. The Phone Settings menus are listed in
the display.
3. Press 6 ( ) Security. You’re prompted to enter the lock code. The
default lock code is the last four digits of your telephone number.
4. Press 2 ( ) Edit Code.
5. At the “ ENTER NEW LOCK CODE ” prompt, enter the new lock code.
6. You’re prompted to confirm the new lock code.
7. At the “CONFIRM LOCK CODE” prompt, re-enter lock code.
8. “ DEVICE CODE SET ” message appears in the display confirming that your
lock code has been changed.
Note: Your phone does not allow you to view the lock code for obvious security reasons. If you change the
lock code, be sure to write down or memorize the new code.
Resetting Your Phone
Reset Settings returns all setup options to their factory default.
1. In idle mode, press MENU, use the right navigation key to highlight
Settings & Tools and press .
2. Press 6 ( ) Phone Settings. The Phone Settings menus are listed in
the display.
3. Press 6 ( ) Security, and enter the lock code.
4. Press 3 ( ) Reset Settings. A prompt appears in the display asking if
you wish to restore default settings (except for the Contacts).
5. Press Yes to restore default settings or press No to return to the Security
list
.