Samsung LNS4695DX-XAA - Manual (Page 79)

English-77
Adjusting the Picture Quality
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone,
then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so
that it is aligned on the center of the screen.
1 Press the SOURCE button to select “PC”.
2 Press the MENU button. Press the or button to select “Setup”,
then press the ENTER button.
3 Press the or button to select “PC”, then press the ENTER
button.
4 Press the or button to select “Image Lock”, then press the
ENTER button.
5 Press the or button to select “Coarse” or “Fine”, then press the
ENTER button.
6 Press the or button to remove the picture noise.
Select “Return” by pressing the or button, then press the
ENTER button to return to the previous menu.
Press the EXIT button to exit.
This feature may change the width of the image. If necessary, adjust the position to center.
BN68-01047J-01Eng.qxd 7/13/06 4:51 AM Page 77