Samsung SGH-X105NBATMB - Manual (Page 45)

Multimedia Messages
84
Setup (Menu 2.8)
You can change the default settings for sending or
receiving multimedia messages.
The following options are available:
Delivery Report: when this option is enabled, the
network informs you whether or not your message
has been delivered.
Read Reply: when this option is enabled, your
phone sends a request for a reply along with your
message to the recipient.
Auto Download: you can set whether or not your
phone retrieves new incoming messages from the
MMS server without notifications. When this option
is enabled, the phone automatically retrieves new
messages from the server. As soon as you receive a
message you can use more options while you are
reading it. See page 76 for details about the
options.
Message Acceptance: you can specify the
category of messages you want to receive.
Hide ID: when this option is enabled, your phone
number does not display on the recipient’s phone.
Expiry Date: you can select the length of time
your messages are stored at the message center
after they are sent.
Delivery Time: you can set the delay time before
the phone sends your messages.
Priority: you can select the priority level of your
messages.
Report Allowed: when this option is disabled, the
sender of an incoming message does not receive a
delivery report from the network.
Multimedia Messages
85
Page Duration: you can set how long one page of
the received message displays on the message
presentation screen. After a specified time, the
display automatically scrolls to the next page.
MMS Profile
(Menu 2.9)
In this menu, you can configure various network
settings that are required when you send or receive
multimedia messages.
Notes:
• The last profile you accessed is automatically
activated for sending messages.
• In most cases, you don’t need to change these
settings. If you change them without the service
provider’s instruction, the MMS feature may not
work properly.
The following options are available for each profile:
Profile Name: enter a name that you wish to
assign to the MMS server.
Connection URL: enter the address of your MMS
server.
Security: select a data transmission mode. Choose
Secure to protect your data against unauthorized
access; otherwise, choose Non-Secure.
IP Address: enter the gateway address required to
connect to the MMS server.
User Name: enter the user ID required to connect
to the MMS server.
Password: enter the password required to connect
to the MMS server.
X105.book Pages 84 - 85 Saturday, February 7, 2004 9:34 AM