Settings, Networks and the internet, Configuring your network connection – Samsung HT-EM45-ZA User Manual

Page 28

Advertising
background image

|

28

English

Settings

Networks and the Internet

When you connect this product to a network,
you can use network based applications and
functions such as Smart Hub and BD-LIVE, and
upgrade the product's software through the
network connection. For more information about
accessing and using Internet services, see the
Network Services chapter of this manual on pages
46~48. Instructions for configuring the network
connection start below.

Configuring Your Network Connection

Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, and you have a wired or wireless
network, we recommend using the Automatic
configuration procedures described below.

If you are connecting to a wired network, connect
the product to your router using a LAN cable or
Samsung Wireless LAN Adapter before you start
the configuration procedure.

If you are connecting to a wireless network,
disconnect any wired network connection before
you begin.

To begin configuring your network connection,
follow these steps:

1 · In the Home screen, select Settings, and

then press the E button.

2 · Select Network, and then press the E

button.

3 · Select Network Settings, and then press the

E button.

4 · Go to the instructions for Wired networks

starting below or the instructions for Wireless
networks starting on page 29.

Wired Network

K

Wired – Automatic

After following Steps 1 to 3 above:

1 · Select Start in the Network Settings screen,

and then press the E button. The product
detects the wired connection, verifies the
network connection and then connects to the
network.

K

Wired - Manual

If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.

After following Steps 1 to 3 above:

1 · Select Start in the Network Settings screen,

and then press the E button. The Network
Status screen appears. The product attempts
to verify the network connection and fails.

Network Settings

Wired network connection failed.

MAC Address

XX:XX:XX:XX:XX:XX

IP Address

0.0.0.0

Subnet Mask

0.0.0.0

Gateway

0.0.0.0

DNS Server

0.0.0.0

Unable to connect to the network. Try the following:
check if your IP address is set correctly in IP Settings.
Contact your Internet Service Provider for more information.

Retry

IP Settings

Previous

OK

2 . Select IP Settings on the right of the screen,

and then press E button.
The IP Settings screen appears.

3 . Select the IP Mode field, and then set it to

Manual.

4 · Use the number keypad on your remote to

enter the Network values. Use the ▲▼◄►
buttons on the remote to move from entry
field to entry field.

|

NOTE

|

\ You can get these values from your Internet provider. You

can also view these values on most Windows computers.
For instructions, see "Getting the Network Settings
Values." on next page.

5 · When done, highlight OK, and then press

E button. The product verifies the network
connection and then connects to the
network.

HT-EM45_ZA_0417-1(D2D).indd 28

HT-EM45_ZA_0417-1(D2D).indd 28

2012-04-17 오후 6:30:07

2012-04-17 오후 6:30:07

Advertising