Samsung EC-NV20ZBBA-US - Manual (Page 15)

Connecting to a Power Source
ŝ14Ş
You can charge the rechargeable battery (SLB-0837(B)) by using an SAC-46
KIT. The SAC-46 KIT consists of the AC adapter (SAC-46) and the USB
cable (SUC-C2). When the AC adapter and the USB cable are assembled, it
can be used as an AC cable.
ƃ Using the SAC-46 as an AC charger
: Insert the AC adapter into the USB connector.
When the AC adapter is inserted, it can be
used as an AC charger.
ƃ Using the SAC-46 as an USB cable
: Remove the AC adapter from the USB
connector. You can transmit data with a PC
(p.88) or charge the battery.
In the following cases, the battery may not be charged.
ƃ When using the USB cable that was not supplied with this camera. Use
the supplied USB cable.
ƃ When using a USB hub. Connect the camera to the PC directly.
ƃ When other USB devices are connected to the PC. Disconnect the
other USB devices.
ƃ When the USB is connected to the USB port located on the front of the
computer. Use the USB located on the back of the computer.
ƃ If the USB port of the PC doesn't meet the Power output standard (5V,
500mA), the camera may not be charged.