Samsung SCX-4500W-XAA - Manual (Page 19)

2 .1
<Software overview>
2
Software overview
This chapter gives you an overview of the software that comes with your
machine. Further details on how to use the software are explained in the
Software section.
This chapter includes:
• Supplied software
• Printer driver features
• System requirements
Supplied software
After you have set up your machine and connected it to your computer,
you must install the printer software. If you are a Windows or Macintosh
OS, install the software from the supplied CD and if you are a Linux OS
user, download the software from the Samsung website
(www.samsung.com/printer) and install.:
OS Contents
Windows • Printer driver: Use this driver to take full
advantage of your machine’s features.
• Scanner driver: TWAIN and Windows Image
Acquisition (WIA) drivers are available for
scanning documents on your machine.
• Smart Panel: This program allows you to monitor
the machine’s status and alerts you when an error
occurs during printing.
• SmarThru a : This is the accompanying Windows-
based software for your multifunctional machine.
• SetIP: Use this program to set your machine’s
TCP/IP addresses.
• User’s Guide in PDF
a. Allows you to edit a scanned image in many ways using a powerful image
editor and to send the image by email. You can also open another image editor
program, like Adobe Photoshop, from SmarThru. For details, please refer to the
onscreen help supplied on the SmarThru program.
Linux • Linux printer driver: Use this driver to run your
machine from a Linux computer and print
documents.
• SANE: Use this driver to scan documents.
• SetIP: Use this program to set your machine’s
TCP/IP addresses.
Macintosh • Macintosh printer driver: Use this driver to run
your machine from a Macintosh computer and print
documents.
• Scan driver: TWAIN driver is available for
scanning documents on your machine.
• Smart Panel: This program allows you to monitor
the machine’s status and alerts you when an error
occurs during printing.
• SetIP: Use this program to set your machine’s
TCP/IP addresses.