Samsung SGH-I317TSAATT - Manual (Page 176)

USB Tethering
Note: To enable USB tethering on your phone, dial 611 or go
to att.com/mywireless to set up the service.
1. From the Settings screen, touch Connections ➔
More networks ➔ Tethering and Wi-Fi hotspot.
Connections
2. Connect your phone to your PC using a USB cable.
3. Touch USB tethering to add a check mark and activate
the feature.
Note: When enabled, the USB tethering icon displays in
the Status Bar.
4. Follow the onscreen instructions to use USB tethering.
Help
� From the Tethering and Wi-Fi hotspot menu, touch
Help for additional information
VPN
The VPN settings menu can be used to set up and manage
Virtual Private Networks (VPNs).
Before using VPN, you must first set up a screen unlock PIN
or password. For more information, refer to “Lock Screen”
on page 173.
Important! Before you can use a VPN you must establish and
configure one.
Adding a Basic VPN
Before you add a VPN you must determine which VPN
protocol to use: PPTP, L2TP/IPSec PSK, L2TP/IPSec RSA,
IPSec Xauth PSK, IPSec Xauth RSA, or IPSec Hybrid RSA.
1. From the Settings screen, touch
Connections
Connections ➔
More networks ➔ VPN.
2. Touch Basic VPN.
3. Touch Add.
4. Enter a name for the VPN network in the Name field.
5. Select a VPN type from the Type drop-down menu.
6. Enter the Server address and any other required fields
that are dependent upon the Type you entered
previously.
169
Connections
Connections