Samsung SCH-S960RWBTFN - Manual (Page 358)

WPS Push Button
The WPS (Wi-Fi Protected Setup) feature (sometimes associated with
a physical or on-screen button on most WAPs) allows you to pair
your device and WAP without the need for entering a passcode. This
process is similar to Wi-Fi Direct pairing.
In this case, once the WPS feature is active on your WAP, your device
can then detect it and then immediately pair to it.
Note: WPS-capable routers appear in the Wi-Fi list of available
devices with the term (WPS available) below their name.
To pair your device using WPS:
1. Follow the WPS activation instructions specific to your Wireless
Access Point.
2. From the Home screen, press and then tap Settings ➔
Wi-Fi.
3. Press then tap WPS push button.
4. Once the connection is complete, confirm the external router
now appears in the Wi-Fi list as connected.
353