Samsung LS23PUHKFV-ZA - Manual (Page 31)

Using the product 3-5
(This is unavailable when <MagicBright> is set to <Dynamic Contrast> and <Cinema> mode.)
SIZE & POSITION
MENU DESCRIPTION
H-Position Moves the position of the display area on the screen horizontally.
This function is only available in Analog mode.
When a 720P,1080i or 1080P signal is input in AV mode ,select <Screen Fit >to adjust
horizontal position in 0-6 levels.
V-Position Moves the position of the display area on the screen vertically.
This function is only available in Analog mode.
When a 720P,1080i or 1080P signal is input in AV mode ,select <Screen Fit >to adjust vertical
position in 0-6 levels.
Image Size PC signals
•
<Auto> - The picture is displayed at the aspect ratio of the input signal.
• <Wide> - The picture is displayed in full screen regardless of the aspect ratio of the input signal.
• A signal not in the standard mode table is not supported.
• If the resolution is set to the optimal resolution, the aspect ratio does not change whether
the <Image Size> is set to <Auto> or <Wide>.
AV signals
•
<4 : 3> - Displays pictures at the 4 : 3 aspect ratio.
• <16 : 9> - Displays pictures at the 16 : 9 aspect ratio.
• <Screen Fit> - If a 720P, 1080i or 1080P signal is input in HDMI/DVI input mode, the picture is
displayed as is without truncation.
This can only be set when the external input is connected through HDMI/DVI and <PC/AV
Mode> is set to <AV>.
Menu H-Position You can adjust the horizontal position of the OSD.
Menu V-Position You can adjust the vertical position of the OSD.