Avital AVISTART 6501 - Manual (Page 8)

User-Programmable RPM Door Lock
The system can be programmed to automatically lock the doors when the
engine reaches the factory preset RPM level. (See the "Programming Table for
System Features" on page 15). When you begin driving, your vehicle doors
will automatically lock. When you turn the ignition key off, the doors will
automatically unlock.
NOTE: Ignition-Controlled Door Lock feature must be programmed OFF.
Protected Valet Mode
You should place your system in Protected Valet Mode whenever your vehicle
is being serviced by mechanics, car wash personnel or driven by valet parking
attendants. While in the Protected Valet Mode, all remote starter and alarm
functions are bypassed to prevent unauthorized or accidental operation. If a
remote start is attempted, the parking lights will flash 4 times and the vehicle
will not start. Remote-controlled door lock/unlock , trunk release and all
optional accessories will still operate.
To Turn on Protected Valet Mode
1 . Turn the ignition key to the "ON" position or start the engine.
2 . Flick the valet switch to the "ON" position.
3. The LED will turn on solid red to indicate the system is in the Protected
Valet Mode.
4 . Turn the ignition key to the "OFF" position.
To Turn off Protected Valet Mode
1 . Turn the ignition key to the "ON" position or start the engine.
2 . Flick the valet switch to the "OFF" position.
3. The LED will turn off to indicate the system is no longer in the Protected
Valet Mode.
4 . Turn the ignition key to the "OFF" position.
Remote-Controlled Valet
For your convenience, the system can be put into Valet Mode via the remote
control. While in Remote-Controlled Valet, all alarm functions are bypassed.
Remote start, remote-controlled lock/unlock and all optional accessories will
still operate.
NOTE: The system must be disarmed in order to activate the
Remote-Controlled Valet feature.
6
AviStart 6501 Owner's Manual - 0999