Samsung LTP326WX-XAC - Manual (Page 32)

English- 29
O P E R AT I O N
3
Press the LEFT/RIGHT
buttons to select “Start”, then
press the ENTER
button.
The TV will begin memorizing
all of the available channels.
The TV automatically cycles
through all of the available
channels and stores them in
memory. This takes about
one to two minutes.
Press
ENTER at any time
to interrupt the memorization
process and return to the
Channel menu.
2
Press the UP/DOWN
buttons to select
“Auto Program”.
Press the ENTER
button.
1
First, select the correct
signal source
(Air, STD, HRC, IRC).
See steps 1~2 on previous
page.
4
After all the available
channels are stored, the Auto
program menu reappears.
Press the EXIT button to exit.
Ex) Press to select channel 108.
Storing Channels in Memory (Automatic Method)
To select channels over 100
BN68-00653A-01Eng.qxd 5/7/04 9:04 AM Page 29