Advanced recording, Grabación avanzada – Samsung SC-D453-XAP User Manual

Page 55

Advertising
background image

ESPAÑOL

ENGLISH

55

55

Advanced Recording

The Wind Cut function works in both Camera and Player (Audio dubbing)
modes.
Use the Wind Cut when recording in windy places such as the beach or near
buildings.

The Wind Cut function minimizes wind noise or other noise while recording.
- When the wind cut is on, some low pitched tones sounds are eliminated

along with the sound of the wind.

1. Set the Power switch to CAMERA or PLAYER.

2. Set the Mode switch to TAPE.

3. Press the MENU button.

The menu list will appear.

4. Move the Menu selector to the left or right to select

Record, then press the Menu selector.

5. Move the Menu selector to the left or right to select

Wind Cut, then press the Menu selector.

6. To activate the Wind Cut function, move the Menu selector

to the left or right to select On, then press the Menu
selector
.

7. To exit, press the MENU button.

Wind Cut (

) icon will be displayed.

[ Note ]
Make sure Wind Cut is set to off when you want the
microphone to be as sensitive as possible.

Cutting Off Wind Noise (Wind Cut)

Grabación avanzada

La función Wind Cut <Antiviento> está operativa en las modalidades Camera
y Player (Grabación de audio adicional).
Use la función Wind Cut cuando grabe en lugares donde sople el viento,
como en la playa o cerca de edificios.

Esta función minimiza el ruido del viento y otros ruidos durante la grabación.
- Cuando esta función está activada, se eliminan algunos sonidos graves

junto con el del viento.

1. Coloque el interruptor Power en CAMERA o PLAYER.

2. Coloque el interruptor Mode en TAPE.

3. Pulse el botón MENU.

Aparece la lista del menú.

4. Mueva el Selector de menú a la izquierda o a la

derecha hasta seleccionar Record <Grabar> y pulse el
Selector de menú.

5. Mueva el Selector de menú a la izquierda o a la

derecha hasta seleccionar Wind Cut <Antiviento> y
pulse el Selector de menú.

6. Para activar la función Wind Cut <Antiviento>, mueva el

Selector de menú a la izquierda o a la derecha hasta
seleccionar On <Actv.>, y pulse el Selector de menú.

7. Para salir, pulse el botón MENU.

Aparecerá el icono de Wind Cut < Antiviento> (

).

[ Nota ]
Asegúrese de que la función Wind Cut <Antiviento> esté
desactivada cuando desee que la sensibilidad del
micrófono sea la mayor posible.

Corte de ruido del viento (Wind Cut <Antiviento>)

Move

Select

Exit

MENU

Camera Mode

Back

Rec Mode
Audio Mode

Wind Cut

Camera Mode

√Record

Rec Mode
Audio Mode
Wind Cut

√SP
√12Bit
√Off

Move

Select

Exit

MENU

Off
On

4

6

60min

0:00:10

SP

STBY

7

œ

00840E SCD451 USA+ESP~086 3/22/05 12:01 PM Page 55

Advertising
This manual is related to the following products: