Samsung HT-F5500W-ZA - Manual (Page 37)

English
37 |
05
Media Play
• The Home Theater has an effective reception range of
up to 32.8 feet in all directions if there are no obstacles.
The connection will be automatically cut off if the
device is out of this range. Even within this range, the
sound quality may be degraded by obstacles such as
walls or doors.
• This wireless device may cause electrical interference.
during its operation.
To connect the Home Theater to a
Bluetooth device
Connect
Bluetooth device
Check if the Bluetooth device supports the Bluetooth
compliant stereo headset function.
1. Press the FUNCTION button on the remote control
of the product to display the BT message.
2. Select the Bluetooth menu on the Bluetooth device
you want to connect. For instructions, refer to the
Bluetooth device's manual.
3. Select the Stereo headset menu on the Bluetooth
device.
• You will see a list of devices
4. Select "[HTS]Fxxxxx" from the searched list.
• When the Home Theater is connected to the
Bluetooth device, the device name of the
connected Bluetooth device, followed by the
name of home theater will appear on the front
display of home theater.
5. Play music on the connected device.
• You can listen to the music playing on the
connected Bluetooth device over the Home
Theater system.
| NOTES |
\ The Home Theater only supports Middle Quality SBC
data (up to 237kbps@48kHz), and does not support
High Quality SBC data ([email protected]).
\ The AVRCP feature is supported. It's functionality
will differ, depending on the specifications of the
connected device.
\ Connect only to a Bluetooth device that supports the
A2DP Profile.
\ Only one Bluetooth device can be paired at a time.
\ The search or connection functions may not work
properly in the following cases:
- If there a strong electric field near or around the
home theater.
- If several Bluetooth devices are simultaneously
paired with product.
- If the Bluetooth device is turned off, not in place, or
malfunctions.
- Note that such devices as microwave ovens, wireless
LAN adapters, fluorescent lights, and gas stoves use
the same frequency range as the Bluetooth device,
and can cause electric interference.
To disconnect the Bluetooth device from
the Home Theater
You can disconnect the Bluetooth device from the Home
Theater. For instructions, refer to the Bluetooth device's
manual.
• When the Home Theater is disconnected from the
Bluetooth device, the Home Theater will display
DISCONNECTED on the front display.
To disconnect the Home Theater from the
Bluetooth device
Press the ( ) button on the front panel of the Home
Theater to switch from BT to another mode or turn off the
Home Theater.
• Except when you disconnect the home theater by
changing functions, the connected Bluetooth device
will wait a certain time for a response from the
Home Theater before terminating the connection.
(Disconnection time may differ, depending on the
Bluetooth device.)
| NOTES |
\ In Bluetooth connection mode, the Bluetooth
connection will be lost if the distance between the
Home Theater System and the Bluetooth device
exceeds 32.8 feet. When the Bluetooth device comes
back into effective range or you restart the Bluetooth
device, you have to pair the device and home theater
again to reconnect.
\ In Bluetooth mode, the screen saver will start if
the Bluetooth device stays in the Ready state for 5
minutes. To reconnect the Bluetooth device, turn off
the screen saver, and then connect the device. To turn
off the screen saver, press any button on the remote
control (the Volume button, a number button, etc.)
HT-F5500W_ZA_0528.indd 37 HT-F5500W_ZA_0528.indd 37 2013-05-29 오전 10:44:21 2013-05-29 오전 10:44:21