Samsung HT-BD2ET-XAA - Manual (Page 56)

56
sound mode
SFE(SOUND FIELD EFFECT) MODE
You can set the SFE best suited for the type of music you are listening to.
Press the SFE MODE button.
SFE MODE appears on the display panel.
Each time the button is pressed, the selection changes as
follows
HALL1 ➞ HALL2 ➞ JAZZ ➞ CHURCH ➞ ROCK ➞ SFE OFF.
HALL : Provides a clear vocal as if listening in a concert hall.
JAZZ : Recommended setting for Jazz.
ROCK : Recommended setting for Rock.
CHURCH : Gives the feel of being in a grand church.
SFE OFF : Select this for normal listening.
SFE mode is not available with HD audio sound.
NEO:6 MODE
Enables you to play back 2 channel PCM channel sound over 5.1 speakers.
Press NEO:6 MODE button.
NEO:6 MODE appears on the display panel.
Each time the button is pressed, the selection changes as follows.
CINEMA ➞ MUSIC ➞ NEO:6 OFF.
This mode decodes 2 channel signals to a high precision digital
matrix decoder.
CINEMA : CINEMA mode is optimized for movie playback.
MUSIC : MUSIC mode is optimized for music playback.
NEO:6 OFF : Select this for normal listening.
NEO:6 mode is not available with HD (High Defi nition) audio sound.
PCM signal is available when it is at 32KHZ, 44.1KHZ, 48KHZ, 88.2KHZ or 96KHZ.
This mode is available only with PCM 2 channel or DTS audio sources.
•
•
•
•
•
•
•
M

•
•
•
•
•
M



HT-BD2E_XAA_0603.indd 56 2008-06-03 �� 4:47:02