Samsung SGH-A717ZKAATT - Manual (Page 94)

91
Configuring your Phone’s Connections
Your phone is wirelessly connecting to the Internet via a built in WAP browser.
Connection can be made via either one of three available WAP browsers: MEdia Net
wap1.x, MEdia Net wap2.x, AT&T MMS (MultiMedia Server), AT&T IMS. Use this
menu to create and customize the profiles containing the settings for connecting
your phone to the network. You need these settings to use the web browser or send
MMS messages or e-mails. Although the active connection can be changed by the
user, it is recommended that this choice be made with the assistance of either the
retailer or customer service representative.
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the key.
3. Select Connectivity. Highlight Connections and press the Select soft key
or the key. Use the Up or Down Navigation key to highlight one of
these options:
• MEdia Net wap1.x
• MEdia Net wap2.x
• AT&T MMS
• AT&T IMS
4. Press the Options soft key.
Note: The MEdia Net WAPs are pre-configured and can not be altered on this screen. The AT&T MMS
connection option can be edited, renamed, or deleted on this screen. Your phone is set up by default
for connecting to the network. If you change the settings without first checking with your service
provider, the web browser, MMS, and e-mail features may not work properly.
5. To create a new connection, press the Options soft key, select New, and
press the Select soft key or the key.
- or -
6. To edit the existing AT&T MMS, highlight this entry, press the Options soft
key, select Edit, and press the Select soft key or the key.
7. Select the parameter you want to edit:
• Set Name: enter a profile name.
• Access Name: edit the access point name.
• Auth Type: select the type of authentication used for this WAP connection:
None, Normal, or Secure.
• User ID: enter the User ID required to connect to the network.
• Password: enter the user password required to connect to the network.