Samsung SC-D5000-XAC - Manual (Page 101)

ENGLISH
Advanced Techniques
101 101
SPOT-AE
✤ SPOT AE mode works in CAMERA mode only.
✤ Use this function to adjust the exposure of the subject to obtain
better results when there is strong backlight or high contrast
between the subject and background, for example on seashores or
ski slopes.
1. Set the device to CAMERA and the power
switch to REC mode.
2. Press the SPOT AE(STOP) button.
■ The Icon ( ) is displayed on the
LCD screen.
3. Place the subject in the center of AF frame
then press the Photo Button halfway down.
■ After focus is set, you will hear two beeps
and an icon that shows focus is fixed will
be displayed on the LCD screen.
4. Press the Photo Button down fully to record a picture.
5. To exit SPOT AE Mode, press the SPOT AE Button again or turn it
off.
✤
✤
■
■
FADE
S.SHOW
BLC
REV FWD
TAPE
MEMORY
PLAY
REC
OFF