Samsung RF26XAEPN-XAA User Manual
Page 13
Setting Up
@
01
4&55*/(61
5. Position the Top Table(
2
) in place.
With a Philips head screwdriver, insert and tighten the 3
screws into the Top Table. With the door opened, reinsert
the Top Table cap(
) and close the doors.
When reattaching the top table, make sure that the
wires are not pressed or damaged by the top table.
2
3&"55"$)*/(5)&3&'3*(&3"503%0034
4. Connect the water line (
5
) and then insert a
clip on the coupler with pulling tube.
Connect the one connector(
4
) on left side
door and two connectors (
3
) at each side
of the top cap.
3
4
Red Clip
(1/4”)
The clip is enveloped inside of the top cap.
Dispenser
Door Tube
Cabinet
Tube
5
3
The water line (
5
) must be fully inserted to the marked line to prevent
water leakage from the dispenser.
Be sure to sensor (yellow cable) is inside the top table.
CAUTION
DPVQMFS