Samsung SCH-R550ZKACRI - Manual (Page 23)

Call Functions 20
Three-Touch Dialing
Memory locations 100 through 999 are special Three-Touch
dialing locations.
Example: For Speed Dial number 113, briefly press , briefly press
again, then press and hold until the name and number appear
in the display and the number is dialed.
Pause Dialing From a Contacts Entry
• If you speed dial a contact that contains (two-second) 2-Sec Pause(s)
simply wait for the pauses to pass and the dialing to complete.
• If you speed dial a contact that contains (hard) Wait(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Making a Call — Quick Search Dialing
Use the Quick Search feature to dial any number stored in your
Contacts list by pressing the number keys that correspond to the
first few letters of a Contact name.
Note: For information on activation, see “Quick Search” on page 117
Quick Search Dialing a Contact
To find and dial a Contact, do the following:
1. In standby mode, press the number keys that correspond
to the first few letters of the Contact name, as shown.
2. Press the Up navigation key. The Contact List screen
appears showing the desired Contact name, as shown.
3. Press to call the number.
Making a Call — Voice Dialing
Your Jet Set mobile phone includes state-of-the-art voice
recognition software that lets you dial numbers using your voice.
Using Voice Dial
Use the Voice Dial command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Voice Dial to dial any valid telephone number,
even numbers not stored in your contact list, by speaking the
individual digits in the number (Digit Dialing).
Voice Dialing Tips:
• Wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking to someone
on the phone.
• When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1. In standby mode, press the key.