Samsung LS24HUCEFV-XAA - Manual (Page 50)

MENU → , → → → , →
Transparency
Changes the opaqueness of the background of the OSD.
MENU → , → → , → → , →
1) High
2) Medium
3) Low
4) Opaque
Blue Screen
If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background. If you wish to
continue viewing the poor picture, you must set the "Blue screen" mode
to "Off".
- Operates only for AV, S-Video, Component and HDMI mode.
MENU → , → → , → → , →
HDMI Black
Level
When a DVD or set-top box is connected to your TV via HDMI, it may
cause a degradation in the screen quality, such as an increase in the
black level, a low contrast, or discoloration, etc., depending on the
external device connected. In this case, adjust the screen quality of your
TV by configuring the HDMI black level.
- Operates only for HDMI mode.
MENU → , → → , → → , →
MPA
MPA (Motion Picture Acceleration-Motion Picture Acceleration)
This function is used to play movies.
You can enjoy better screen quality.
If your monitor is used as a normal monitor, turn this function Off.
MENU → , → → , → → , →
Safety
Screen
The Safety Screen function is used to prevent afterimages that may
appear when a still picture is displayed on the screen over a long time.
- The Screen Scroll function scrolls the screen for the specified period of
time.
- This function is not available when the power is turned off.
MENU → , → → , → → , →
1) Safety Screen
: Determines whether to turn the Screen Scroll function Off or On.
2) Interval
: Determines the time interval to run the Screen Scroll operation.
(1~10 Hour)
The time is calculated on the basis of the power on time.
3) Second
: Determines the time period to run the Screen Scroll operation.
(10~50 Second)
4) Type
: You can change the Safety Screen Type.
(Pixel, Bar, Eraser)
Safety
Screen
Interval
Second
Type
Audio Power
When your PC is in Power Saving mode, and this function is turned 'On',
power is supplied to the 'AUDIO POWER' terminal of the external
speaker on the back of your monitor. If this function is turned 'Off', power
is not supplied to that terminal.
MENU → , → → , → → , →
LED
Brightness
Adjusts the brightness of the Power LED.
The higher the level, the brighter the Power LED.
If you set a brightness level, the LED blinks and is saved after one
second.
MENU → , → → , → → , →