Apple Bluetooth Headset - Manual (Page 7)

7
Switch from the Headset to iPhone
To stop using the headset and hear calls through
iPhone instead, you can either:
m Turn the headset o∂ . You can turn it on at any time to
use it with iPhone again.
m During a call, tap Audio Source on iPhone and choose
iPhone or Speaker (for speakerphone).
Reconnect the Headset to iPhone
You can tell that calls will be routed through the
headset if the Bluetooth icon (◊) in the iPhone status
bar is blue or white (depending on which application
you’re using).
If the headset gets disconnected from iPhone, two low
beeps sound from the headset. You can tell that the
headset is disconnected from iPhone if the Bluetooth
icon in the status bar is gray or isn’t present.
To route calls through the headset:
m Press the button to reinitiate a connection.
m If that doesn’t work, make sure the headset is turned
on, charged, and in range of iPhone (within about 30
feet).
m If that doesn’t work, on iPhone make sure Bluetooth is
turned on. From the Home screen, choose Settings >
General > Bluetooth and turn Bluetooth on.
m If that doesn’t work, pair the headset with iPhone again.
See page 3.