Samsung HT-BD7200T-XAC - Manual (Page 39)

39
eng
●
audio Setup
V-Sound (Virtual Sound)
Produces realistic sound through 2-channel audio with the aid
of virtual effects, this gives the user thefeeling they are listening
to 5.1 channel audio.
Press the V-Sound button.
Each time the button is pressed, the selection changes as
follows :
V.Sound on ¨ V.Sound oFF
dSp Function
Press the dSp button.
Each time the button is pressed, the selection changes as
follows:
SMaRt Sound ¨ audio upSCale
¨ poWeR BaSS ¨ dSp Mode oFF
SMART SOUND : This will regulate and stabilize the
volume level against a drastic volume change when
changing channels or during a scene transition.
AUDIO UPSCALE : This also helps enhance your sound experience (ex. mp3 music).
You can upscale your MP3 level sound(24 kHz, 8bit) to CD level sound(44.1 kHz, 16bit).
POWER BASS : POWER BASS function stresses low tones providing thudding sound effects.
•
•
•
•
•
Setting the Sound edit
Press the ▲▼ buttons to select Sound edit,
then press the enteR or ► button.
Press the ▲▼ buttons to select the desired Speaker,
then press the ◄► button to adjust the settings.
When done, use the ▲▼◄► buttons to select Save,
then press the enteR button.
If you don’t want to save your settings, use the ▲▼◄►
buttons to select Cancel, then press the enteR button.
Press the RETURN butt on to return to the previous menu.
adjusting Front Speaker Balance
• You can select between 0, -6, and OFF.
• The volume decreases as you move closer to –6.
adjusting Subwoofer Speaker level
• The volume level can be adjusted in steps from +6dB to 6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
4.
5.
6.
M

Pandora
Disclaimer
Setup
aV Sync : 50msec
test tone
Speaker distance
Sound edit ►
System Setup
Language Setup
Audio Setup ◄
Display Setup
HDMI Setup
Network Setup
Parental Setup
dVd
HT-BD7200_XAA_0317-2.indd 39 2009-03-17 �� 7:55:47