Samsung HLR5087WX-XAA - Manual (Page 23)

English - 23
Connecting an Analog Cable Converter Box
This connection allows you to watch cable and premium channels. You should keep your TV
selected to “Cable IN” so that you can use the TV features. When viewing premium channels,
select “Air IN” and tune the TV to channel 3 or 4 (whichever channel is vacant in your area), then
use the converter box to change channels. You will need two coaxial cables.
NOTES
• When you use a converter box with
your TV, there may be features that you
can not program using the remote
control, such as programming your
favorite channels and blocking
channels.
• The output from "Cable Out" is not
available when "Air/CATV" is set to
"Cable" in the PIP menu.
Connecting an Analog Cable Converter Box and a VCR
This connection allows you to watch and record basic and premium cable channels, as well as
watch videotapes. You should keep your TV selected to “Cable IN” so that you can use the TV’s
features. When viewing premium channels or recording with the VCR, select “Air IN” (whichever
channel is vacant in your area), then use the converter box to change channels.
Caution: If you want to record one channel
while watching another channel, a splitter
(not included) must be added between the
cable and “Cable IN”. One output of the
splitter goes to “Cable OUT” and the second
output is connected to IN on the cable
converter box.
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
When you use a converter box with your TV
there may be features that you can not
program using the remote control, such as
programming your favorite channels and
blocking channels.
From
Cable
TV Rear Panel
From
Cable
Stereo VCR
2_BP68-00448A-01(18~31) 1/20/05 5:10 PM Page 23