Samsung PG19RS9T - Manual (Page 24)

22
Appendix
PowerSaver
This monitor has a built-in power management system called PowerSaver. This power
management system saves energy by switching your monitor into a low-power mode when it
has not been used for a certain amount of time. The available modes are “On,” “Standby,”
“Suspend,” and “Off”.
This power management system operates with a VESA DPMS compliant video card installed
in your computer. You use a software utility installed on your computer to set up this feature.
See the table below for details.
Table 1. Power-saving modes
NOTE: This monitor automatically returns to normal operation when horizontal and vertical
sync return. This occurs when you move the computer’s mouse or press a key on the
keyboard.
This monitor is EPA E NERGY S TAR
®
compliant and NUTEK compliant when used with a
computer equipped with VESA DPMS functionality.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.
State Normal
Operation
Power-Saving Function mode (EPA/NUTEK)
Standby Mode Suspend Mode
Position A1
Power-off Mode
Position A2
Horizontal Sync
Vertical Sync
Video Active
Active
Active Inactive
Active
Blanked Active
Inactive
Blanked Inactive
Inactive
Blanked
Power
Indicator Green Amber Amber/Green
Blinking
(0.5 sec interval) Amber
Blinking
(1 sec interval)
Power
Consumption 130W (Max.)
110W (Nom.)
60W(Nom.) Less than 15W Less than 3W
900SLe1.book Page 22 Tuesday, January 11, 2000 10:03 AM