Samsung SPH-A700BSSXAR - Manual (Page 31)

Section 2A: Your PCS Vision Phone - The Basics 23
You can also place calls from your Sprint PCS Phone by using Sprint
PCS Voice Command
SM (page 166), Speed Dialing numbers from your
Contacts (page 29), and using your Call History listings (page 84).
Tip: To speed dial a phone number from standby mode, press and hold the
speed dial number. If the speed dial number is two digits, enter the first
digit, then press and hold the second digit. (For information on setting up
speed dial numbers, see “Assigning Speed Dial Numbers” on page 90.)
(This feature will not work when you are roaming off the Sprint PCS
Nationwide Network; when roaming you must dial using eleven digits [1
+ the area code + the seven-digit phone number.])
Answering Calls
To answer an incoming call:
1. Make sure your phone is on. (If your phone is off, incoming
calls go to voicemail.)
2. Press to answer an incoming call. (Depending on your
phone’s settings, you may also answer incoming calls by
opening the phone or by pressing any number key. See “Call
Answer Mode” on page 46 for more information.)
Your Sprint PCS Vision Phone notifies you of incoming calls in the
following ways:
ⅷ
The phone rings or vibrates (unless set to Silence All).
ⅷ The LED flashes.
ⅷ
The backlight illuminates.
ⅷ
The screen displays an incoming call message.
If the incoming call is from a number stored in contacts, the entry
name is displayed. The caller’s phone number may also be displayed,
if available.
The following options are also available:
ⅷ Press to quiet the ringer.
ⅷ Press and hold the volume key to send the incoming call to your
voicemail box.