Samsung MX-F830B-ZA - Manual (Page 15)

14
English English
14
English
15
Recording Speed
You can select the recording speed before recording.
Each time you press the CD REC SPEED button
on the remote control, the recording speed will
change as follows:
RECORD SPD X 1 ; RECORD SPD X 4
• When you record from the tuner or an external source, you
cannot change the recording speed.
• If you select RECORD SPD X 4, sound is not produced during
the recording.
• If you connected the microphone, you have one recording
speed mode available: RECORD SPD X 1.
• During recording, if you disconnect the microphone, the
recording will stop. If you reconnect the microphone, the
recording will not restart.
The GIGA SOUND function amplifies the bass
sound and provides twice the bass for powerful,
realistic sound.
1. Press the GIGA SOUND BLAST button on the
main unit or the GIGA button on the remote control.
Each time you press this button, the sound switches
as follows:
OFF ; GIGA SOUND BLAST
2. To cancel this function, press the GIGA SOUND
BLAST button until “OFF” is displayed.
• The GIGA SOUND mode may be different depending
on your region.
GIGA SOUND function
• Do not disconnect the USB device or the AC Cord during
recording as this may cause damage to the file.
• WMA/MP2 files can be copied but not recorded.
• If you disconnected the USB device during a recording,
the main unit powers off and you will not be able to delete
the recorded file from your USB device. If this occurs,
please connect the USB device to a PC, backup the USB
data to the PC, and then format the USB device.
• When the USB memory has insufficient free space, the
system will display “NOT ENOUGH MEMORY”.
• The USB device or HDD you are recording to must be
formatted in the FAT file system. The NTFS file system is
not supported.
• When you use the CD high speed search function, CD
recording is not available.
• The recording time may be longer with some USB devices.
• In the program mode, you can't use the CD recording
function.
• The equalizer is set to "OFF" automatically and is not
available during a CD recording.
• The GIGA SOUND function is set to "OFF" automatically
and is not available during a CD recording.
• The REPEAT function is set to "OFF" automatically and is
not available during a CD recording.
• If you use the MIC function during a CD recording, the
voice from the microphone will be recorded.
• You can not record the radio when searching or when no
available station is found in the Tuner mode.
• Note that setting the input level too loud when recording
music from an external device through the AUX or USB
channel may cause noise in the recording. If this occurs,
lower the external device’s volume level.
• The maximum TUNER/AUX recording time is 5 hours.
Your mini-compact system provides predefined
equalizer settings that are optimized for particular
music genre. You can also adjust the bass, middle
and treble levels manually.
1. Press the EQ button.
Each time you press this button, the sound mode will
change as follows:
OFF;FLAT; RANCHERA ; SAMBA ; CUMBIA
; HABANERA ; BOOMBA ; REGGAE ; MERENGUE
; SALSA ; PARTY;POP;HIP HOP;ROCK;JAZZ
; CLASSIC ; ELECTRONIC ; MP3 ENHANCER
; VIRTUAL SOUND ; U B 0
2. To set the BASS, MIDDLE, TREBLE level manually:
Press the ENTER button when you select U B 0.
Result: The BASS level flashes.
Press the TUNING/ALBUM , or . button to select a level
from -06 to 06.
Press the ENTER button.
Result: The MIDDLE level flashes.
Press the TUNING/ALBUM , or . button to select a level
from -06 to 06.
Press the ENTER button.
Result: The TREBLE level flashes.
Press the TUNING/ALBUM , or . button to select a level
from -06 to 06.
Press the ENTER button.
Result: setting is complete.
• The equalizer is set to "OFF" automatically and is not available
during a CD recording.
• If no buttons are pressed within 4 seconds, your settings will
automatically be cancelled and the previous settings will be saved.
• The equalizer mode may be different depending on your region.
Selecting EQ Mode
You can directly select the user EQ mode by
pressing the USER EQ button.
1. Press the USER EQ button on the main unit until
the required option is selected.
Each time you press this button, the sound mode will
switch as follows: OFF ; U B 0
2. Refer to Step 2 above to set the BASS, MIDDLE,
TREBLE level.
• The equalizer is set to "OFF" automatically and is not available
during a CD recording.
• If no buttons are pressed within 4 seconds, your settings will
automatically be cancelled and the previous settings will be saved.
• The equalizer mode may be different depending on your region.
You can directly select the LOCAL EQ mode by
pressing the LOCAL EQ button.
1. Press the LOCAL EQ button on the main unit until
the required option is selected.
Each time you press this button, the sound mode will
switch as follows:
OFF;FLAT; RANCHERA ; SAMBA ; CUMBIA
; HABANERA ; BOOMBA ; REGGAE ; MERENGUE
; SALSA
• The Local equalizer is set to "OFF" automatically and is not
available during a CD recording.
• If no buttons are pressed within 4 seconds, your settings will
automatically be cancelled and the previous settings will be saved.
• The equalizer mode may be different depending on your region.
Selecting USER EQ Mode
Selecting LOCAL EQ Mode
MX-F830B-ZA-ENG-0228.indd 15 2013-3-13 16:29:27