Samsung SCH-U550ZNAVZW - Manual (Page 27)

Call Functions 24
2. Press the directional key right or left to highlight
Settings & Tools menu. Press Phone Settings.
Press System Select.
3. Press the directional key up or down to choose the setting
you want, and press .
Voice Commands
Voice Commands is advanced speech recognition software that
can be used to activate a wide variety of functions on your phone.
Voice Commands software automatically voice activates all
contacts for voice dialing and searching, no pre-recording or
training needed. Speak phone numbers naturally to dial, and use
voice commands to navigate phone menus.
Voice Commands Settings
You can adjust the settings and preferences by opening Voice
Commands menu. Using this menu, you can change the
following Voice Command features:
1. From the home screen, press the Voice Commands key
. The Voice Commands screen appears in the
display.
2. Press the right soft key Settings.The following options
appear in the display:
• Digit Dial Readout: Reads out the numbers pressed when dialing
a phone number.
• Menu Readout: Reads out the menu items as you scroll through
them.
• TXT Msg Readout: Reads out the text in a TXT message.
Note: Picture or Video messages cannot be read back to you.
• Choice List: If Voice Commands is not absolutely confident that it
has correctly identified a name or number, it can display a choice
list of up to three possibilities, and prompt you to confirm the
correct one. You can control when choice lists appear by changing
the Choice Lists setting to the following:
– Automatic: Voice Commands displays a choice list when it is not
confident it has identified the correct choice from among multiple
alternatives.
– Always Off: Voice Commands never displays a choice list. Instead,
the application picks the best from among the possible choices.
• Sensitivity: Sensitivity controls the balance between rejecting too
much, which means the phone frequently does not recognize
names, numbers, or commands, and rejecting too little, which
means it frequently recognizes something even if nothing was said.
When Voice Commands rejects an utterance, it displays a message
such as “Please repeat…” or “No match found.” If you frequently
experience these messages, you might be able to get better
recognition by selecting the Sensitivity setting Reject Less. If you
frequently experience false activations (Voice Commands detects a