Samsung RT19FSSS - Manual (Page 35)

Auto
Volume Reduces the differences in volume level among
broadcasters.
• On /Off
Dolby
Virtual Dolby Virtual Sound On/Off (Dolby Virtual simulates the effect
of the Dolby Surround sound system, recreating the movie-
theatre or concert-hall- quality sound.)
• On /Off
BBE BBE (Barcus-Berry Electronics) recreates the natural sound
and improves sound clarity through boosting high and low
range frequencies.
As a result, high sounds are clearer, brilliant and finely
detailed while low sounds are tight, well-defined and
harmonically rich.
• On /Off
BBE and Dolby Virtual cannot be functioned at the same time.
Select
Sound You can select either Main or Sub when PIP is On.
• Main / Sub
FM Radio Press the button on the front or the "FM RADIO" button on
the remote control to select the "FM RADIO" feature.
- The direct button on the remote control is 'FM RADIO'
button.
• Auto Store
You can scan the frequency ranges available on your
FM Radio in your area and store all the channels found
automatically.
• Manual Store
You can scan the frequency ranges available on your
FM Radio in your area and store all the channels found
manually.
- Channel : Chooses the Radio channel through the
adjustment of up/down under the current frequency.
- Search : The tuner scans the frequency range until
the first channel or the channel that you selected is
received.
- Store : Restores the number user inputs.
• Add / Delete
Adds or deletes channels from the memory.
If you select FM Radio, picture will turn black
while FM Radio is functioning in TV, EXT,
AV, S-Video, Component modes except PC,
DVI modes.
Auto Store
Manual Store
Add / Delete
Channel
The sound settings can be adjusted to suit your personal
preference.
1) Bass
: Emphasize low frequency audio.
2) Treble
: Emphasize high frequency audio.
3) Balance
: Allows you to adjust the sound balance between the left and right
speakers.
Ballance allows you to adjust the sound balance between the left and
right speakers and you can hear the sound even when the sound
value is set to 0.