Samsung DVD-E360-ZA - Manual (Page 14)

14
Notes
- If the “Select Menu Language” doesn’t appear, please contact Samsung Customer Service.
- Do not press any button or unplug the power cord during the upgrade.
- The upgrade procedure may change. Refer to the web site (www.samsung.com).
- When software is upgraded, the video and audio settings you have made will return to their default
(factory) settings. We recommend you write down your settings so that you can easily reset them after
the upgrade.
- Samsung provides no assurance that all freeware disc burning software will be able to burn upgrade
files that will work on the player.
Problem Action
The screen is
blocked. • Press the ®|| button on the front panel for more than 5 seconds with no disc
inside. All settings will revert to the factory settings.
Forgot
password.
• Press the ®|| button on the front panel for more than 5 seconds with no disc inside.
All settings including the password will revert to the factory settings (0000). Don't
use this unless absolutely necessary.
Troubleshooting
Before requesting service, please check the following.
General
Power Requirements AC 120V ~ 60 Hz
Power Comsumption 10W (ON), 1W (OFF)
Weight 2.4 lbs
Dimensions 11.8” (W) X 8.19” (D) X 1.65" (H)
Operating Temperature
Range
+41°F to +95°F
Operating Humidity Range 10 % to 75 %
Video Output
Composite Video
1 channel : 1.0 Vp-p (75 Ω load)
60Hz
Component Video
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
I-SCAN & P-SCAN
480i, 480p
Audio Output
Output terminal 2 CH
Maximum Output Level 2Vrms
Frequency Response 20Hz ~ 20kHZ
Digital Audio Output Coaxial terminal (S/PDIF)
Specifications