14 connecting an av device with component output, Connecting an av device with component output -14 – Samsung SP2553XWX-ZA User Manual

Page 30

Advertising
background image

2-14

Installation and Connection

2-14 Connecting an AV device with Component output

Make sure that the AV device and your projector are turned off.

1. Connect the [PC IN] terminal on the back of the projector to the Component terminal on your AV device using a D-Sub to

Component cable (Not supplied). This cable has a D-Sub connector on one end and three RCA jacks on the other.
- For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-8, "Supported Display
Modes".

2. Connect the [

AUDIO IN (L-AUDIO-R)

] terminal on the back of the projector and the Audio out terminal on your AV device using

an audio cable (Not supplied).

Advertising