Setting up your french door refrigerator, Getting ready to install the refrigerator, Selecting the best location for the refrigerator – Samsung RF26HFPNBSR-AA User Manual

Page 6: When moving your refrigerator

Advertising
background image

2012.5.16 3:1:40 PM

06_

setting up

Setting up your French Door

Refrigerator

GETTING READY TO INSTALL
THE REFRIGERATOR

Congratulations on your purchase of this Samsung

French Door Refrigerator.

We hope you enjoy the state-of-art features and

Selecting the best location for the
refrigerator

A location with easy access to a water supply.

Choose:

A location without direct exposure to sunlight.
A location with a level fl oor.
A location with enough space for the

refrigerator doors to open easily.
A location that allows suffi cient space to the

right, left, back and top for air circulation.
A location that allows you to move the

refrigerator easily if it needs maintenance or

service.

If the refrigerator does not have enough space,

the internal cooling system may not work properly.

If your refrigerator has an ice maker, allow extra

space at the back for the water line connections.

When you install the refrigerator next to a fi xed

wall, you need a minimum clearance of 3 ¾”

(95mm) between the refrigerator and wall to allow

the door to swing open.

Important: Make sure that you can easily move

your refrigerator to its fi nal location by measuring

doorways (both width and height), thresholds,

ceilings, stairways, etc.

The following chart details the exact height and

depth of this Samsung French Door Refrigerator.

Allow clearance to the right, left, back and top

when installing. This will help reduce power

consumption and keep your energy bills lower.
Do not install the refrigerator where the

temperature will go below 50ºF (10ºC).
Do not locate the refrigerator where it may

become wet.

When moving your refrigerator

To prevent fl oor damage, be sure the front

adjusting legs are in the up position (above

the fl oor). Refer to ‘Adjusting the Level’ in

the manual (on page 9).

3 inches

3/4

2 inches

2 inches

B

A

C

E

D

B

A

C

E

D

Flat-blade screw
driver(-)

Control Lever

CAUTION

Model

Depth “A”

33 27/32” (860mm)

Width “B”

35 25/32” (909mm)

Height “C”

68 3/8” (1737mm)

Overall Height “D”

70” (1778mm)

Depth “E”

36 7/32” (920mm)

RF263T** / RF263B**

RF261B**/ RF260B** / RF26H**

Advertising