Samsung SPH-M630ZKASPR - Manual (Page 44)

28 Section 2A. Phone Basics
Saving a Phone Number
Your phone can store up to 600 Contacts entries.
Contacts entries can store up to a total of seven phone
numbers, and each entry’s name can contain 64
characters. Your phone automatically sorts the
Contacts entries alphabetically. (For more information,
see “Contacts” on page 76.)
To save a number from standby mode:
1. Enter a phone number and press .
2. Select New Entry or Existing Entry and press .
3. Select a label ( Mobile , Home , Work , Pager , Fax , or
Others ) and press .
4. Use the keypad to enter the new contact name
and press
. (See “Entering Text” on page 32.)
– or –
Search for an existing contact name and press
to save the new number.
5. Press Done (left softkey) to save the entry. You are
then notified if the number was successfully
added.
Finding a Phone Number
You can search Contacts entries for phone numbers
that contain a specific string of numbers.
1. Enter four or more of the last digits in standby
mode. (The more numbers you enter, the more
specific the search becomes.)
Ⅲ Matching Contacts entries are displayed within an
onscreen list.
2. To display the Contacts entry that contains the
phone number you entered, select the entry and
press .
– or –
To dial the number, highlight the entry from the list
and press
.
Note The End-of-Call options are not displayed for calls
identified as No ID or Restricted.
Sprint M630.book Page 28 Monday, February 2, 2009 10:56 AM