Samsung DW80F800UWS-AA - Manual (Page 20)

English - 20
Middle nozzle
1. Pull the upper rack towards the front
and remove it.
2. Check whether the nozzle holes are
clogged by food particles.
3. If cleaning is needed, remove the
nozzle.
4. To remove the nozzle, unfasten and
remove the nut, and then remove the
nozzle.
5. Clean the nozzle, re-insert it, and fasten
the nut.
6. When fastening the nut, turn it fi rmly by
hand.
7. Check whether the nozzle is engaged
correctly by rotating it by hand.
Upper nozzle
1. Check whether the nozzle holes are
clogged by food particles.
2. If cleaning is needed, remove the nozzle.
3. To remove the nozzle, pull out the upper
rack fi rst, unfasten the nozzle cap by
turning it counterclockwise, and then
remove the upper nozzle.
4. Clean the nozzle, re-insert it, and then
fasten the nozzle cap to the nozzle by
turning the cap clockwise.
5. Check whether the nozzle is engaged
correctly by rotating it by hand.
STORING YOUR DISHWASHER
If you need to store your dishwasher for an extended period of time, fi rst drain and disconnect it. If you
leave water in the hoses and internal components, you can damage the dishwasher.
After draining and disconnecting the dishwasher, be sure to turn off the water supply valve and circuit
breaker.
cleaning and maintaining your
dishwasher
1
2
Cap nozzle
DW80F800_DD81-01554A-02_EN_131121.indd Sec5:20 DW80F800_DD81-01554A-02_EN_131121.indd Sec5:20 2013-11-21 6:48:18 2013-11-21 6:48:18