Musical room calibration, User eq, English – Samsung HT-D5210C-ZA User Manual

Page 35: Musical room calibration mode, Measurement

Advertising
background image

English

35

03

Setup

Musical Room Calibration

By setting the Musical Room Calibration (MRC)
function just once when you relocate or install the
product, you can have the product automatically
recognize the distance between speakers, levels
between channels, and frequency characteristics
to create a 5.1-channel sound fi eld optimized for
your environment.

500mA

ASC IN

500

mA

AS

C I

N

ASC

microphone

Musical Room Calibration Mode

You will hear either the Musical Room Calibration
mode or the User Speaker Settings.

Off: You will hear sound in the Speaker Setting
value.

On : You will hear sound in the Musical Room
Calibration mode.

Measurement

Plug the ASC microphone into the ASC IN jack.

Place the ASC microphone at the listening position.

Musical Room Calibration will be automatically
set up in the following sequence:
Front L Center Front R Surround
R Surround L Subwoofer

Press the RETURN button to cancel the
Musical Room Calibration Setting.

1.

2.

NOTE

Running the Musical Room Calibration
function takes about 3 minutes.

Make sure there is no disc in the product
when you run the Musical Room Calibration
function.

If the ASC microphone is disconnected
during the Musical Room Calibration setup,
the setup will be canceled.

When the Musical Room Calibration function
is activated, the DSP, Dolby Pro Logic ll and
SFE Mode will not work.

If the product is connected to external
devices or other components (such as an
iPod, AUX, D. IN), the Musical Room
Calibration Setup may not work properly.

Noise may result in incorrect measurements.
Ensure the room is quiet when you run the
Musical Room Calibration.

Place the microphone in the main listening
position.

Make sure there are no objects between the
speakers and microphone.

Note that the test tones of the speakers may
be loud.

Do not place the microphone behind
furniture or too close to the wall. Otherwise,
it can produce an incorrect test result.

User EQ

You can confi gure the equalizer settings manually
to your preference.

Settings

Display

Audio

Network

System

Language

Security

General

Support

User EQ

Reset > Adjust < Move ' Return

6

·

·

·

·

·

0

·

·

·

·

·

-6

0

250Hz

0

600Hz

0

1kHz

0

3kHz

0

6kHz

0

10kHz

0

15kHz

A

HT-D5210C_ZA_1224.indd 35

HT-D5210C_ZA_1224.indd 35

2011-12-26 11:31:38

2011-12-26 11:31:38

Advertising