Audiovox VE 640 - Manual (Page 6)

-6-
1) REMOTE INFRARED SENSOR-This sensor
receives infrared signals from the hand held
remote control unit.
2) TV INDICATOR-When illuminated, the VE640
is in television mode.
3) FM/AM INDICATOR-When illuminated, the
VE640 is set to receive AM or FM radio
broadcast.
4) AM/PM INDICATOR-When illuminated
indicates PM, not illuminated indicates- AM.
5) LCD-DISPLAY- Displays the channel number,
FM/AM frequencies, the time of day and
Auxillary Input (AU).
6) CH 1 INDICATOR-When illuminated,
the VE-640 is tuned to the preset channel 1.
7) CH 2 INDICATOR-When illuminated, the
VE-640 is tuned to the preset channel 2.
8) CH 3 INDICATOR-When illuminated, the
VE-640 is tuned to the preset channel 3.
9) SET-Press this button to set the time,
alarm, and the FM/AM broadcast.
10) SEEK UP BUTTON-Press this button for
the next higher available channel with
sufficient signal strength.
11) SEEK DOWN BUTTON-Press this
button for the next lower available channel
with sufficient signal strength.
12) UP&DOWN CH-BUTTONS-Press these
buttons to increase or decrease the channel
to view a specific channel.
13) UP & DOWN (VOL) BUTTON-Press
these buttons to increase, or decrease the
volume level.
FRONT PANEL CONTROLS
14) CH3-BUTTON-Press this button to view
the third user programmed channel.
15) CH2-BUTTON-Press this button
to view the second user programmed
channel.
16) CH1-BUTTON-Press this button to view
the first user programmed channel.
17) LCD-SCREEN-Displays video signals.
18) Microphone- For hands-free speaker phone
operation.
19) TELEPHONE BUTTON (TEL)-Pressing this
button allows the user to answer an
incoming call.(The VE-640 contains hands
free speakerphone).
20) AUDIO-VIDEO BUTTON (AV)-Press this
button to view an external A/V source that is
plugged into the rear A/V jacks.
21) CONTRAST CONTROL- This control
(located on the side of the LCD) adjusts the
picture contrast.
22) COLOR CONTROL- This control (located
on the side of the LCD) adjusts the color
level of the picture.
23) BRIGHTNESS CONTROL-This control
(located on the side of the LCD) adjusts the
brightness of the picture.
24) ON/OFF BUTTON-Press this button to turn
the VE-640 ON and OFF.
25) TV BUTTON-Press this button to have the
VE-640 to switch back to TV mode.
26) FM/AM BUTTON- Allows user to set the
VE-640 to receive AM or FM radio
broadcasts.