Warning, Getting started, 2 - english – Samsung BD-P1200-XAA User Manual

Page 3

Advertising
background image

G

etting Started

2 -

English

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE THE COVER(OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates “dangerous voltage”

inside the product that presents a risk of

electric shock or personal injury.
This symbol indicates important instructions

accompanying the product.

Do not install this equipment in a confined space such

as a bookcase or similar unit.

WARNING

To prevent damage which may result in fire or electric

shock hazard, do not expose this appliance to rain or

moisture.

Note to CATV system installer

This reminder is provided to call CATV system installer’s

attention to Article 820-40 of the National Electrical Code

(Section 54 of Canadian Electrical Code, Part I) that

provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall be

connected to the grounding system of the building as

close to the point of cable entry as practical.

FCC NOTE (for U.S.A):

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio or

television reception, which can be determined by

turning the equipment off and on.

The user is encouraged to try to correct the interference

by one or more of the following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect this equipment into an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

This class B digital apparatus meets all

requirements of the Canadian Interference --

Causing Equipment Regulations.

CAUTION

THIS PRODUCT UTILIZES A LASER. USE OF

CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE. DO NOT

OPEN COVER AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

Note:

• This unit can be used only where the power supply is

AC 120V, 60Hz. It cannot be used elsewhere.

• This Blu-ray disc player is designed and manufactured

to respond to the Region Management Information.

If the Region number of a BD/DVD disc does not

correspond to the Region number of this Blu-ray disc

player, the Blu-ray disc player cannot play the disc.



CLASS 1

LASER PRODUCT

KLASSE 1

LASER PRODUKT

LUOKAN 1

LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LÁSER CLASE 1

Advertising