Samsung SGH-T409MBATMB - Manual (Page 36)

33
Note: The Security Type refers to the particular security protocol being used for a specific wireless network.
WPA is the current security standard for wireless networks and is recommended by T-Mobile. WEP is
an older, and less robust security standard, but it provides wider compatibility.
9. Press the Down key to highlight the Key: option. Press the Left or Right
key to set to Automatically Connect, or Don’t automatically connect.
10. Press the Down key to highlight the Non-Broadcast SSID option. Press
the key to place a checkmark in this box if your router does NOT
broadcast its SSID. In general, the default setting for most routers will
broadcast the SSID.
11. Press the Down key to highlight the Inter AP handovers option. Press the
key to place a checkmark in this box if you want your phone to
perform a fast handoff (for quicker authentication).
12. Press the Down key to highlight the IP setting option. Press the Left or
Right key to set to Dynamic or Static. Dynamic is the standard and
recommended setting.
If you select Static in this step, press the Down key to highlight the IP
address option. Press the key to enter the IP address menu. If you
are using a T-Mobile Router, copy the information regarding the Subnet
Mask, DSN Server, and Gateway from your router into your phone. The IP
address you input must be different from the one you use to access the
router. If you are connected to a Wi-Fi network that requires Static IP
addresses (usually in a corporate environment), please see your System
Administrator to get the required information.
13. When finished, press the Save soft key.
t409.book Page 33 Monday, July 23, 2007 3:58 PM