Samsung SGH-A637CWAATT - Manual (Page 11)

Getting Started 8
Note: The previous illustration is the correct and incorrect method for
connecting the charger. If the incorrect method is attempted, damage
to the accessory port will occur therefore voiding the phone’s warranty.
2. Plug the adaptor into a standard AC wall outlet.
3. When the phone is completely charged ( ), unplug the
charger from the power outlet.
4. Remove the adapter from the phone by gently pulling the
connector out and replace the plastic cover back over the
open jack.
Important!: The battery charging function may stop if you are on a call or
viewing a streaming-video while charging your battery.
Note: During charging, you must unplug the adapter before removing the
battery from the phone to avoid damage.
Installing the microSD™ Card
To add additional memory to your phone, you can insert a
microSD™ card into the memory card slot, located on the upper
left side of the phone. Use the following instructions and
illustrations for proper insertion and removal.
Note: The phone supports up to an 8GB microSD™ card
1. Remove the battery cover. (For more information, refer to
“Removing the Battery” on page 5.)
2. Open the side slot and carefully insert the microSD™ card.
3. Push the microSD™ card into the slot until it clicks into
place.
Warning!: Please note the printed circuit side is facing down when inserting
the card.
4. Replace the battery cover.
Incorrect
Correct