Samsung LE46F71B - Manual (Page 14)

English-12
You can select the type of picture which best corresponds to your viewing
requirements.
1. Press the MENU button to display the menu. Press the or
button to select “Picture”, then press the ENTER button.
2. Press the ENTER button again, to select “Mode”.
Press the ENTER button again.
3. Press the or button to select the desired picture effect.
Press the ENTER button.
4. Press the EXIT button to exit.
ΠDynamic: Selects the picture for high-definition in a bright room.
ΠStandard: Selects the picture for optimum display in a normal environment.
ΠMovie: Selects the picture for comfortable display in a dark room.
ΠCustom: Select to view your favorite display settings.
(Refer to “Adjusting the Custom Picture”)
You can also press the
P.MODE button on the remote
control to select one of the
picture settings.
The Picture mode must be adjusted separately for each input source.
You can return to the factory defaults picture settings by selecting the “Reset”.
(Refer to “Resetting the Picture Settings to the Factory Defaults” on page 13)
Changing the Picture Standard
ΠContrast: Adjusts the lightness and darkness between objects and the background.
ΠBrightness: Adjusts the brightness of the whole screen.
ΠSharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
ΠColour: Adjusts the colours, making them lighter or darker.
ΠTint (NTSC only): Adjusts the colour of objects, making them more red or green for a more natural look.
Your set has several settings which allow you to control picture quality.
1. To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 3.
2. Press the or button to select a particular item.
Press the ENTER button.
3. Press the or button to decrease or increase the value of a
particular item. Press the ENTER button.
4. Press the EXIT button to exit.
Adjusting the Custom Picture
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only “Contrast”, “Brightness” and “Colour” can be adjusted
This function is very useful in the situation that the TV is used in a weak
signal area. LNA amplifies the TV signal in the weak signal area, a low-noise
preamplifier boosts the incoming signal.
1. Press the MENU button to display the menu.
Press the or button to select “Channel”, then press the ENTER button.
2. Press the or button to select “LNA”, then press the ENTER button.
3. Select “Off“ or “On“ by pressing the or button.
Press the ENTER button.
4. Press the EXIT button to exit.
If the picture is noisy with the LNA set to On, select Off.
LNA setting must be set for each individual channel.
Using the LNA (Low Noise Amplifier) Feature
BN68-01047R-00Eng.indd 12 BN68-01047R-00Eng.indd 12 2006-08-29 10:09:46 2006-08-29 10:09:46