Adaptec AVC-2210 - Manual (Page 13)

5
Plugging In Your AVC-2210
Plugging In Your AVC-2210
To set up your AVC-2210:
1 Connect the power adapter.
(See the figures on page 4 if you need help locating the ports on
your AVC-2210.)
2 Connect your video device to your AVC-2210 using the
included A/V cable. Your device may have a proprietary cable.
S-Video users only—Connect your S-Video cable (not included)
to your analog video device using the S-Video port on your
AVC-2210. You can use the audio plugs of the A/V cable
included in your VideOh! DVD kit to connect to the Audio-L
and Audio-R ports.
Connect red audio plug to red
audio port and white audio
plug to white audio port
Connect yellow video plug to
yellow video input port