Lexicon DC-2 - Manual (Page 29)

Lexicon, Inc.
DC-2/MC-1 Serial Communications Protocol
Printed on: 10/19/00
29 of 44
7.3.26.1 Packet Description
Application Header:
Command
DC_CMD_SET_CUST_NAME 0x2C
Data Count 1 + strlen(CustomName) + 1 nn
Application Data:
Data[0]
CustomNameEnable nn
Data[1]-Data[DataCount-1] CustomName ch ch ch … 0x00
7.3.26.2 Data Description
CustomNameEnable: Enables/Disables the Custom Name Display.
DataType: Boolean
TRUE: CustomName Enabled
FALSE: CustomName Disabled
CustomName:
Data Type: Null(0x00) terminated ASCII character string.
Max Length: CUSTOM_NAME_LENGTH defined in Appendix E Protocol Constants.
7.3.26.3 DC-2/MC-1 Response
If the custom name enable is TRUE then the custom name banner is display on “power on”. If the Custom
Name Enable is FASLE the custom name is not displayed. The CustomName string is copied to
Nonvolatile RAM. The DC-2/MC-1 will Ack when completed with this command.
7.3.26.4 Data Validation:
If an invalid string is passed, DC-2/MC-1 will ignore the command and transmit a DC_NAK command
with an error code DC_INVALID_DATA.
7.3.27 Set Input Name by Id
Sets an Input Name to the transmitted value for a given input.
7.3.27.1 Command Packet Description
Application Header:
Command
DC_CMD_SET_INPUT_NAME 0x2E
Data Count strlen(InputName) + 2 nn
Application Data:
Data[0]
InputId 0 to 7
Data[1]-Data[DataCount-1] InputName ch ch ch ... 0x00
7.3.27.2 Data Description
InputId:
Data Type: Unsigned 8 bit Integer
Max Value: 7
Conversion: Input Id are defined in Appendix D Input Id’s
InputName:
Data Type: Null(0x00) terminated ASCII character string.
Max Length: INPUT_NAME_LENGTH defined in Appendix E Protocol Constants.
7.3.27.3 DC-2/MC-1 Response
DC-2/MC-1 will copy the InputName to the given input.
7.3.27.4 Data Validation: