APC SILCON 10-40KW 400V UPS - Manual (Page 15)

External Connection
990-4050
Installation Guide APC Silcon 10-40kW 400V UPS 15
4.1.2 Connecting the 40kW UPS
NOTICE!
Install gland plate in bottom of unit
CAUTION!
At a switch mode load of 100% the neutral must be rated for 200% output phase current.
CAUTION!
This UPS unit is an EN 50091-2 product and may cause radio interference in a domestic
environment. Take preventive measures if necessary.
System Integration interface
Communication Interface
Parallel Controller
Please refer to 8.5
Optional
Output
Input
Relay Board (Optional)