Changing the picture size, Freezing the current picture, Digital noise reduction – Samsung LE32R32B User Manual
Page 15
English-13
Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
You can select the picture size which best corresponds to your
viewing requirements.
1.
Press the MENU button to display the menu. Press the
or
button to
select “Picture”, then press the ENTER button.
2.
Press the
or
button to select “Size”, then press the ENTER button.
3.
Select the required option by pressing the
or
button.
Press the
ENTER button.
4.
Press the EXIT button to exit.
Changing the Picture Size
You can select these options
by simply pressing the P.SIZE
button on the remote control.
“Auto Wide” function is available only in "TV", "Ext1", "Ext2", "AV", and "S-Video" mode.
In PC Mode, only “16:9” and “4:3” mode can be adjusted.
Select by pressing the
or
buttons. Use the
or
button to move the
picture up and down. After selecting , use the
or
button to magnify or reduce the
picture size in the vertical direction.
“
p
s
u
v
You can return to the factory defaults picture settings.
1.
To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 3 on page 12.
2.
Press the
or
button to select “Reset”, then press the ENTER button.
3.
Press the EXIT button to exit.
The “Reset” will be set for each picture mode.
Resetting the Picture Settings to the Factory Defaults
Press the STILL button to freeze a moving picture into a still one.
Press again to cancel.
Freezing the Current Picture
If the broadcast signal received by your TV is weak, you can activate the Digital
Noise Reduction feature to help reduce any static and ghosting that may appear
on the screen.
1.
Press the MENU button to display the menu. Press the
or
button to
select “Picture”, then press the ENTER button.
2.
Press the
or
button to select “Digital NR”, then press the ENTER button.
3.
Press the or button to select “On” or “Off”. Press the
ENTER button.
4.
Press the EXIT button to exit.
Digital Noise Reduction
BN68-00927H-00Eng.indd 13
BN68-00927H-00Eng.indd 13
2006-09-16 ¿ААь 11:36:44
2006-09-16 ¿ААь 11:36:44