AKG Acoustics WLS 8060 MAX - Manual (Page 9)

8. Specifications
WLS 8060
Amplifier power (rms/peak)
40 W/60 W
Drivers 1 x 8“ and 1 annular driver
Speaker type 2-way bass reflex
Crossover frequency 4 kHz, 12/18 dB/octave
Sensitivity at 1W/1m 96 dB
Max. sound pressure level 125 dB
Audio frequency response 65 Hz to 20 kHz (-6dB)
Projection angle (H x V) 80° x 80°
Mixer inputs Wired microhpone: 1 k Ω balanced
Wireless microphone: internal, 10 k Ω
2 x LINE: 10 k Ω unbalanced
Phantom power 12 V
Outputs 2 x LINE, +12 dB into 600 Ω for recording or second WLS 8060
Connectors Wired microphone input: 3-pin XLR
LINE inputs: RCA jacks (stereo summed to mono)
LINE outputs: RCA jacks
Antenna inputs: 2 x BNC
Squelch threshold -75 to -70 dBm
Equalizer Bass/treble
Processor functions Automatic proximity filter
Limiter with autosubsonic filter
Dimensions (W x H x D) Approx. 240 x 500 x 270 mm (9.4 x 19.7 x 10.6 in.)
Weight Approx. 7 kg (15 lbs.) inclusive of battery and receiver
AC adapter/charger 230 VAC/24 VDC, 0.5 A
Rechargeable battery 12 V, 7.2 Ah
Battery life (speech/ music) Approx. 10 to 14 hours
Transmitter HT 80 + D 880 WL1 PT 80
Carrier frequencies 710.2 to 860.9 MHz
Modulation FM
Audio bandwidth 50 to 20,000 Hz
Polar pattern Hypercardioid --
Frequency stability ±10 ppm (-10°C to +50°C)
Rated deviation 30 kHz (US1a, US1b: 7.5 kHz)
Distortion at 1 kHz <0.8% <0.5%
Compander Yes
Signal/noise 50 dB(A) typical
Limiter Yes
RF output 10 mW
Current consumption 130 mA typical 145 mA
Power requirement 2 x 1.5 V AA size batteries
Battery life >10 hours >8 hours
Input sensitivity -95 dBm typical -
Audio input level for rated deviation 350 mV/1 kHz 1400 mV/1 kHz
Input impedance 220 k Ω
Condenser microphone power supply - 6 V/6.8 k Ω on pin 3
Dimensions (W x D x H) 240 x 36 mm dia. (9.4 x 1.4 in.) 92 x 65 x 20 mm (3.6 x 2.6 x 0.8 in.)
Net weight 245 g (8.6 oz.) 76 g (2.7 oz.)
17
WLS 8060 ”MAX”