AT&T PLUG&SHARETM 6750G - Manual (Page 21)

Configuring the Wireless Network — Windows ® 2000
AT&T Plug&Share™ Wireless Notebook Adapter 108 Mbps 6750G 21
Step 9
When configuration is complete, you must
re-start Windows
® .
When Windows ® restarts you will be prompted
to enter a user name and password. Be sure
to record these in a safe place. You will be
required to enter them for access to the
network each time you restart Windows
® .
Step 10
To verify that configuration is complete, double-
click the My Network Places icon on your
desktop, then double-click Computers Near Me.
In the next window displayed you should see
the names of all network computers.
If any computers do not appear, you will have to
follow the steps in this section on each computer
to configure them for network sharing. Make
sure each computer is assigned a different
name, and all share the same Workgroup name
you entered at Step 8.
Windows ® XP • Windows ® 2000 • Windows ® Me/98 SE