Samsung KE55S9CSL - Manual (Page 14)

English - 14
✎ Turn the TV off to connect or disconnect a CI card or CI card adapter.
Attaching the CI Card Adapter
TV Rear
Attach the adapter as shown side.
✎ To install the CI CARD Adapter, please remove the sticker attached to the TV.
To connect the CI CARD Adapter, follow these steps.
✎ We recommend attaching the adapter before installing the wall mount, or inserting
the “CI or CI+ CARD”.
1. Insert the CI CARD Adapter into the two holes on the product 1.
✎ Please find two holes on the rear of the TV, beside the COMMON
INTERFACE port.
2. Connect the CI CARD Adapter into the COMMON INTERFACE port on the
product 2.
3. Insert the “CI or CI+ CARD”.
Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be inserted.
• If you don’t insert the “CI or CI+ CARD”, some channels will display the message
“Scrambled Signal”.
• The pairing information containing a telephone number, the “CI or CI+ CARD” ID
the Host ID and other information will be displayed in about 2~3 minutes. If an error
message is displayed, please contact your service provider.
• When the configuration of channel information has finished, the message “Updating
Completed” is displayed, indicating the channel list is updated.
✎ NOTE
• You must obtain a “CI or CI+ CARD” from a local cable service provider.
• When removing the “CI or CI+ CARD”, carefully pull it out with your hands since
dropping the “CI or CI+ CARD” may cause damage to it.
• Insert the “CI or CI+ CARD” in the direction marked on the card.
• The location of the COMMON INTERFACE slot may be different depending on
the model.
• “CI or CI+ CARD” is not supported in some countries and regions; check with
your authorized dealer.
• If you have any problems, please contact a service provider.
• Insert the “CI or CI+ CARD” that supports the current aerial settings. The
screen will be distorted or will not be seen.
Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot)
[S9C-ZG]BN68-05491D-01L04.indb 14 2013-10-31 11:16:19