Settings – Samsung LE46D679M3S User Manual
Page 41
41
English
04
Advanced Featur
es
Account Login
For an application with multiple categories, use
◄ and ► to
access the different categories.
✎
For a more enjoyable application experience, register
and log in to your account.
✎
For instructions on creating an account, refer to
Settings Smart Hub
→ Smart Hub Login ID → Creat
your Login ID.
1. Press the Red button in Smart Hub home page.
2. Select desired Login Account, then press the
ENTER
E button.
✎
If you want create account, press Red button then
create account OSD window appear.
3. Enter the Password.
✎
When login succeeds, Login Account will be
displayed on the screen.
¦
Setting up Smart Hub
Settings
Create IDs and configure Smart Hub settings from this
screen. Highlight Settings using
▲ and ▼ buttons and press
the
ENTER
E button.
■
System Setup
✎
Ticker Autorun may not be supported depending
on country.
Ticker Autorun: Enable/disable ticker autorun upon
powering on the TV.
Channel Bound Service (Off / On): Some channels
support application as an Internet data service, allowing
you to access the Internet service while watching TV.
✎
Only available if supported by the broadcaster.
Change the Service Lock password
✎
The default password set is "0-0-0-0."
✎
If you forget the password, press the following
sequence of remote control buttons to reset the
password to “0-0-0-0”:
POWER
(off)
→
MUTE
→
9
→ 2 → 8 →
POWER
(on).
Reset: Resets Smart Hub settings to factory default
settings.
■
Smart Hub Login ID
You can use this menu when creating, deleting the
account. You can control your account including
contents site’s account information.
✎
Account is only for Smart Hub.
Creat your Login ID: Create an account and link it with
desired service application.
✎
NOTE
x
Account will be made less than 8.
x
Maximum number of characters is 8.
Manage your App account
– App Account: Register login information for service
sites such as YouTube.
– Change Password: Change account password.
– Delete Login ID: Delete the account.
✎
If you forget the password, press the following
sequence of remote control buttons to reset the
password to “0-0-0-0”:
POWER
(off)
→
MUTE
→ 9 → 2 → 8 →
POWER
(on).
■
App Manager: Delete and lock application installed to
Smart Hub.
Lock : Lock the application
✎
Accessing a locked widget requires the password.
Delete : Delete the application
■
Properties: Display information about Smart Hub. Use
the Check the speed of your internet connection
option to test your network connection.
R
Return
Settings
▪ System setup
▪
Smart Hub Login ID
▪ App Manager
▪ Properties
▪ Ticker Autorun
: Off
▪
Channel Bound Service
: Off
▪
Change the Service Lock password
▪
Reset
Smart Hub Login ID
A
Create [0~9] Enter PIN R Cancel
Login Account :
Password :
adgjm
OK
Cancel
[LD679-ZG]BN68-03378A-L04.indb 41
2011-04-12 �� 10:23:27