American Megatrends MEGAPLEX II 4U MAN-782-CH4 - Manual (Page 23)

Chapter 3 Field Replaceable Units 17
Replacing a Fan Module
The chassis mounted fan assembly is easily removed and replaced. Should the fan assembly need
replacement use the following procedure. The fan assembly is hot pluggable. You do not have to
shut down the system to replace a fan.
Step 1 Open the top cover.
Step 2 Disconnect the wires and remove the fan assembly.
Step 3 Unscrew the fan to be replaced.
Step 4 Insert the new fan assembly into place and reconnect the wires.
Step 5 Install the top cover.