Samsung LE19C451E2W - Manual (Page 20)

20
English
Basic Features
Picture In Picture (PIP) ¦
PIP t
Watches simultaneously the TV tuner and one external video
source. PIP (Picture-in-Picture) does not function in the same
mode.
NOTE
✎
If you turn the TV off while watching in x PIP mode, the
PIP window will disappear.
You may notice that the picture in the PIP window
x
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
PIP settings
x
Main picture Sub picture
Component, HDMI/DVI TV
PIP (Off / On) ■ : Activate or deactivate the PIP function.
Size ( ■ Х / Г): Select a size for the sub-picture.
Position ( ■ à / – / — / œ): Select a position for the
sub-picture.
Channel
■ : Select the channel for the sub-screen.
Sound Select (Main / Sub) ■ : You can choose the
desired sound (Main / Sub) in PIP mode.
Support Menu
Self Diagnosis
Self Diagnostic might take few seconds, this is part of the
normal operation of the TV.
Picture Test (Yes / No) ■ : Use to check for picture
problems and if the problem continues to occur check
the colour pattern.
Sound Test (Yes / No)
■ : Use the built-in melody sound to
check for sound problems.
If you hear no sound from the TV’s speakers,
✎
before performing the sound test, make sure
Speaker Select is set to TV speaker in the
Sound menu.
The melody will be heard during the test even if
✎
Speaker Select is set to External Speaker or the
sound is muted by pressing the
MUTE button.
Signal Information ■ : (digital channels only) HDTV
channel’s reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
Troubleshooting
■ : If the TV seems to have a problem,
refer to this description.
If none of these troubleshooting tips apply, contact
✎
the Samsung customer service centre.
Software Upgrade
Software Upgrade can be performed via a broadcasting
signal or by downloading the latest firmware from
samsung.com to a USB memory device.
Current Version the software already installed in the TV.
Software is represented as “Year/Month/Day_Version”.
✎
Installing the Latest Version
By USB ■ : Insert a USB drive
containing the firmware upgrade
file, downloaded from
www.samsung.com, into the TV.
Please be careful not to disconnect
the power or remove the USB
drive until upgrades are complete. The TV will be turned
off and on automatically after completing the firmware
upgrade. When software is upgraded, video and audio
settings you have made will return to their default
settings. We advise you to write down your settings so
that you can easily reset them after the upgrade.
Software Upgrade
Current Version 2010/01/18_000001
U Move E enter R return
By USB ►
by Channel
Standby Mode Upgrade Off
Alternative Software ----/--/--/--_------
TV Rear Panel
USB Drive
BN68-02591A.indb 20 2010-03-16 �� 10:07:33