Samsung RR35H6000SS - Manual (Page 14)

English - 14
5. Separate the front leg cover after removing
2 screws.
Screw
6. Unscrew 3 bolts tightening the hinge and also
unscrew 3 bolts on the bottom left side by the
front leg where removed hinge will be attached.
10 mm
10 mm
7. Separate the hinge shaft by using hex wrench
first. Unscrew the bolt to remove the hinge riser
and switch the side of the hinge shaft and the
hinge riser.
Hinge shaft
8 mm Bolt
Hinge riser
8. Attach the hinge on the bottom left side of
the refrigerator where bolts were previously
removed in step 6.
Screw the bolts that were removed on the
bottom right side of the refrigerator for the
future usage.
Switch the the Leg from the left to right.
10 mm
10 mm
9. Remove the screws on the bottom left and right
side of the refrigerator door.
Switch the side of the door stopper from right
to the left.
Hinge riser should be switched as well.
Hinge riser Hinge riser
10. Remove the wire cover on top of the refrigerator
door to switch the side of the wires.
11. Remove the hinge and the grommet from the
refrigerator door.
Detach the right side hinge cover and pull the
wires out of the hinge cover.
Hinge cover
Grommet
Be careful not to damage the electrical
wires when removing the hinge cover.
CAUTION
DA68-03008E-01.indb 14 14. 4. 11. �� 10:40